Algolaser Honeycomb panel, 45 × 45 cm, with aluminum plate, the working base for your laser engraver. It keeps the material flat, lets heat and smoke escape underneath and stops the laser from burning your table. The result: cleaner cuts and edges without marks.
It works with any laser engraver, Algolaser or any other brand, that has room for a 45 × 45 cm base. Measure it like this:
Outer size: 450 × 450 mm · Usable surface: 400 × 400 mm · Height: 22.5 mm
It's the standard size for open-frame diode engravers with a working area of around 40 × 40 cm. For example:
Before buying, check two things: that the space between your machine's legs or frame is 45 × 45 cm or more, and that the head can focus with the piece 22.5 mm higher. Sizes vary by version: if in doubt, message us on WhatsApp with your model and we'll confirm. The Algolaser DIY Kit 3130, with its smaller area, uses its 32 × 32 cm panel.
Do I need it if I only engrave? It isn't essential, but it protects the table and keeps the piece flat. For cutting, we do recommend it.
Do I need to refocus when I use it? Yes. The panel raises the piece by 22.5 mm, so set the focus on the material resting on the panel.
How do I clean it? Shake it to remove debris trapped between the cells. If resin builds up, wipe it with a cloth and isopropyl alcohol, with the machine off.
Algolaser, xTool, Sculpfun, Atomstack, Ortur, Creality and Longer are trademarks of their respective owners and are mentioned only to indicate size compatibility. They do not endorse and are not affiliated with this product.
