Algolaser Laser Engraving Transfer Paper Black or Blue 18 × 24 cm for Glass and Ceramic

Algolaser transfer paper for laser engraving, in black or blue, 18 × 24 cm. It lets you engrave glass, ceramic, translucent materials and metal sharply, where the laser alone doesn't mark well. Cut, soak, apply and engrave: in minutes you turn an ordinary piece into a personalized one.

How it works

The paper gives the piece a dark surface that absorbs the laser's energy. That way the laser doesn't pass straight through translucent materials like glass, or bounce off metals: it uses all its power and ablates the material's surface. That's why the engraving is permanent.

Adjust the result with the power setting: you can leave no trace of the paper so only the engraving shows, or give the engraving a different tone. The final result depends on the material, the laser and the settings you use.

Will it work with my machine and material?

Works with any laser engraver: diode (blue), CO2 or infrared, Algolaser or any other brand.
Materials: glass, ceramic, translucent surfaces and metal.

Ideal for cups, wine glasses, plates, vases, trophies, tiles and mugs. Have another material in mind? Message us on WhatsApp and we'll tell you if it works and with which settings.

Black or blue?

• Black: the all-purpose option. It absorbs the most laser energy, ideal for fine text, sharp lines and high-contrast marks. If it's your first time, start with this one.
• Blue: gives the engraving a different tone from the one you get with black. It doesn't produce a specific color: the tone depends on the material, the laser and the settings.

Why use it

• Sharp engravings where you couldn't before: on glass and translucent pieces the laser no longer passes through, and on metal it no longer bounces off.
• Permanent engraving: the laser ablates the material, so the engraving doesn't wear off.
• More efficient: the laser uses all its power, so you engrave better and in fewer passes.
• Goes a long way: cut only the piece you need for each job.
• Made to sell: personalized gifts, souvenirs, decor and trophies with a professional finish.

How to use it

1. Cut the paper to size and soak it in water for 1 to 2 minutes.
2. Separate the colored layer from the paper backing.
3. Apply it to the surface, adhesive side toward the piece.
4. Dry it with paper or a hair dryer.
5. Engrave with your laser.
6. Soak the piece again and remove the leftover paper.

What's included

• 1 sheet of 18 × 24 cm, in the color you choose: black or blue.

Why buy it at Kennen

• Local stock: no waiting for imports.
• We help with engraving parameters for your machine, material and the result you want.
• Technical support on WhatsApp before and after your purchase.

FAQ

Does it work with a regular diode laser? Yes: it works with any laser engraver, diode, CO2 or infrared.

Does the engraving wear off? No. The laser ablates the material's surface, so the engraving is permanent.

What color does the engraving end up? We don't promise a specific color: the tone depends on the material, the laser, the settings and the paper you use. We recommend testing on a scrap before engraving the final piece. We can help with the settings.

Can I use one sheet for several pieces? Yes: just cut the piece you need for each job.

Algolaser is a trademark of its respective owner and is mentioned to identify the product.